• Official DOIT Serial WiFi Shield for Arduino UNO R3 2560 from ESP8266 WiFi Web Sever Shield ESP-13 IoT DIY Development Board Kit
  • Official DOIT Serial WiFi Shield for Arduino UNO R3 2560 from ESP8266 WiFi Web Sever Shield ESP-13 IoT DIY Development Board Kit
  • Official DOIT Serial WiFi Shield for Arduino UNO R3 2560 from ESP8266 WiFi Web Sever Shield ESP-13 IoT DIY Development Board Kit

Official DOIT Serial WiFi Shield for Arduino UNO R3 2560 from ESP8266 WiFi Web Sever Shield ESP-13 IoT DIY Development Board Kit

0 stars, based on 0reviews
Price:
£4.26 / piece
Quantity: - + 999items available
  • Introduction

    ESP8266-Based Serial WiFi Shield for Arduino is designed and developed by Shenzhen Doctors of Intelligence & Technology (SZDOIT). The shield is designed based on esp8266 by Espressif Systems, pin-compatible with Arduino UNO/Mega2560 DevBorad.

  • More details, please visit: https://github.com/SmartArduino/SZDOITWiKi/wiki

 

Web Sever Configure Mode

14369304698438

and then you can find the WiFi signal from Arduino shield.

 Features

  • WiFi module is industrial-grade chips ESP8266, which is ESP-12E with metal shield, strong anti-interference ability;

  • Shield is pin-compatible with Arduino Uno, Mega2560 and other control board. A voltage converter chip is used to deal with 3.3V (Esp8266) and 5V (Arduino);

  • Dual DIP switches is used for serial ports so that this module shield can be used alone as an Arduino Uno expansion board, and also be used as ESP8266 expansion board;

  • Serial data is transported to WiFi device transparently, and vice versa.  Arduino program does not need any configuration;

  • WebServer is developed to configure WiFi parameters and serial port parameters;

  • The module shield can be used as an independent ESP8266 development board. for instance, downloading the official AT commands firmware, NodeMCU open source firmware can be used;

  • The module shield also can be used as stand-alone expansion board for Arduino Uno.

For more references about Doit serial WiFi module expansion board, driver board information, please refer to: our bbs.

 

Parameters

 

  • 802.11 b / g / n wireless standards;

  • STA / AP modes support ;

  • TCP / IP protocol stack, One socket;

  • Supports standard TCP / UDP Server and Client;

  • Supports serial port baud rate configuration: 

  • 1200/2400/4800/9600/19200/38400/57600/74800/115200 bps;

  • Supports serial data bits: 5/6/7/8 bits;

  • Supports serial parity: none;

  • Supports serial stop bits: 1/2 bit;

  • Pin-compatible with Arduino UNO, Mega;

  • Arduino Pinout 2/3/4/5/6/7/8/9/10/11/12/13;

  • ESP8266 GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16 / ADC / EN / UART TX / UART RX;

  • KEY button: modes configuration;

  • Dual-Ports DIP switches: switching Arduino and ESP8266;

  • WiFi operation current: continuous transmission operation: ≈70mA (200mA MAX), idle mode:<200ua;< span="">

  • Serial WiFi transmission rate: 110-460800bps;

  • Temperature: -40degree ~ + 125 degree;

  • Humidity: 10%-90% non-condensing;

  • Weight: about 20g;

 

 

 Shipping List

 

  • Arduino ESP8266 WiFi shield: 1pcs

Images​

123

HTB1l_XgKFXXXXXaXpXXq6xXFXXXE